Login | Contact Us
Member Username: Member Password:  
Request new password
Print this Page

GAMA NEWS 14-30

For Immediate Release: 06-18-2014


General Aviation
Manufacturers Association

www.GAMA.aero
Headquarters: (+1) 202-393-1500
European Office: (+32) 2 550-3900

GAMA Responds to Sensationalistic USA Today Story on General Aviation Safety

Washington, DC--GAMA President and CEO Pete Bunce issued the following response to Thomas Frank's sensationalistic story in USA Today, "Unfit for Flight":

Thomas Frank’s sensationalistic three-part series in today’s USA Today (Unfit for Flight, June 18, 2014) fails to acknowledge the significant progress general aviation manufacturers have made to improve safety.

The reality is that the number of fatal accidents in general aviation aircraft has declined substantially in recent years. In fact, the goal of 1 fatal accident per 100,000 hours flown by 2018 now appears increasingly likely.

Aircraft manufacturers spend significant time and expense to ensure the safety of their aircraft. This process begins with a three-to-six year period in which the manufacturer demonstrates to the Federal Aviation Administration (FAA) that each design meets the applicable regulations. The tightly controlled aircraft design process results in a specific design approval--the type certified design, or TC—which applies only to that particular approved design that can then be produced. If a manufacturer wants to make something different, it must go through another safety review process for approval.

In the event of a safety concern, the FAA most often issues an Airworthiness Directive (AD), which is a regulation that applies to a particular aircraft model. An AD can implement a new requirement on an existing aircraft design, as well as aircraft that have already been produced. The AD rulemaking tool allows the FAA to quickly address any safety issues in the existing fleet as well as existing designs that are being produced. ADs are an extremely effective way to ensure an airplane’s safety throughout its lifetime.

Furthermore, the industry, along with the FAA and the National Transportation Safety Board (NTSB), continues to work to identify the leading causes of general aviation accidents and has taken major steps to mitigate the risks of these accidents occurring. The General Aviation Manufacturers Association (GAMA), along with other members of the General Aviation Joint Steering Committee (GAJSC)—a group of government, industry, and user groups dedicated to improving aviation safety—has pressed the FAA to streamline requirements governing the use of Angle of Attack (AoA) indicators in general aviation aircraft. AoA indicators can help pilots avoid losing control of the aircraft in flight, the primary cause of accidents. Thanks to these efforts, the FAA recently made it easier and more cost-effective for pilots to install AoAs. This initiative has the potential to have a significant impact toward combatting loss-of-control accidents. The GAJSC continues to develop other concrete improvements to improve overall safety.

As Mr. Frank notes, the average general aviation aircraft is now 41 years old. That’s why the FAA and industry partnered in 2011 to form the Part 23 Aviation Rulemaking Committee (ARC), a group of 150 government and industry experts who spent 18 months studying how to more efficiently and effectively introduce new safety technology into new and existing small general aviation airplanes. GAMA’s Greg Bowles co-chaired this effort. Congress and industry are now actively working to ensure the FAA implements the ARC’s recommendations. Last year, the U.S. House of Representatives and the U.S. Senate swiftly and unanimously passed the Small Airplane Revitalization Act, which requires the FAA to implement the ARC’s recommendations by December 2015. President Obama signed the bill into law last November. Both the House and Senate Appropriations Committees have recently endorsed language focused on ensuring the FAA meets the December 2015 deadline.

In addition, GAMA co-chaired a committee to improve the Airman Certification Standards—the tests pilots are required to take to fly an airplane—to ensure that the questions pilots are asked more accurately reflect real-life scenarios they could confront in the cockpit. As Mr. Frank reports, the NTSB has cited pilot error in 86 percent of fatal general aviation accidents. This committee has sought to bring about a new and more straightforward approach to pilot training, and will help ensure that future generations of pilots are well-equipped to respond to challenges in the sky.

As general aviation manufacturers, our top priority every day is to ensure the safety of pilots and passengers, and we are making great strides in doing so. An honest analysis of all the facts would have made this clear to Mr. Frank’s readers.

Pete Bunce

President and CEO, General Aviation Manufacturers Association



GAMA is an international trade association representing over 80 of the world's leading manufacturers of general aviation airplanes and rotorcraft, engines, avionics, components and related services. GAMA's members also operate repair stations, fixed based operations, pilot and maintenance training facilities and manage fleets of aircraft. For more information, visit GAMA's website at www.GAMA.aero.